Gå til hovedindhold

Hvordan skygger jeg en celle baseret på en anden celleværdi i Excel?

Antag, at du vil skygge en celle (siger A1) med en bestemt baggrundsfarve, hvis celle B4 opfylder kriterierne, som f.eks. Har en bestemt værdi, eller hvis værdien er større eller mindre end et specifikt tal. Hvad ville du gøre? Denne artikel viser dig metoden.

Skygge en celle baseret på en anden celleværdi med betinget formatering

Skygge en celle baseret på en anden celleværdi med betinget formatering

Du kan gøre som følger for at skygge en celle baseret på en anden celleværdi i Excel.

1. Vælg den celle (siger A1), du vil skygge ud fra en anden celleværdi, og klik derefter på Betinget formatering > Ny regel under Home fane.

2. i Ny formateringsregel dialogboks skal du:

  • 2.1 Vælg Brug en formel til at bestemme, hvilke celler der skal formateres valgmulighed i Vælg en regeltype boks;
  • 2.2 Hvis du vil skygge celle A1, når værdien af ​​B4 er større end 500, skal du indtaste formlen = $ B4> 500 ind i Formater værdier, hvor denne formel er sand boks;
    Tips: Hvis du vil skygge celle A1, når B4 har en bestemt værdi, f.eks. "test", skal du bruge denne formel = $ B4 = “test”. Du kan ændre variablen i formlen ud fra dine behov.
  • 2.3 Klik på dannet knap for at specificere en baggrundsfarve;
  • 2.4 Klik på OK når den vender tilbage til Ny formateringsregel dialog boks. Se skærmbillede:

Derefter kan du se, at den angivne celle er skyggelagt baseret på værdien af ​​en anden celle som vist nedenstående skærmbillede.

Relaterede artikler:

Bedste kontorproduktivitetsværktøjer

🤖 Kutools AI Aide: Revolutionér dataanalyse baseret på: Intelligent udførelse   |  Generer kode  |  Opret brugerdefinerede formler  |  Analyser data og generer diagrammer  |  Aktiver Kutools funktioner...
Populære funktioner: Find, fremhæv eller identificer dubletter   |  Slet tomme rækker   |  Kombiner kolonner eller celler uden at miste data   |   Runde uden formel ...
Super opslag: VLookup med flere kriterier  |   Multiple Value VLookup  |   VOpslag på tværs af flere ark   |   Fuzzy Lookup ....
Avanceret rulleliste: Opret hurtigt rulleliste   |  Afhængig rulleliste   |  Multivælg rulleliste ....
Column Manager: Tilføj et bestemt antal kolonner  |  Flyt kolonner  |  Skift synlighedsstatus for skjulte kolonner  |  Sammenlign områder og kolonner ...
Fremhævede funktioner: Grid fokus   |  Designvisning   |   Stor Formel Bar   |  Arbejdsbog & Ark Manager   |  Ressourcebibliotek (Autotekst)   |  Datovælger   |  Kombiner regneark   |  Krypter/Dekrypter celler   |  Send e-mails efter liste   |  Superfilter   |   Specielt filter (filter fed/kursiv/gennemstreget...) ...
Top 15 værktøjssæt:  12 tekst Værktøjer (tilføje tekst, Fjern tegn, ...)   |   50 + Chart Typer (Gantt kort, ...)   |   40+ Praktisk formler (Beregn alder baseret på fødselsdag, ...)   |   19 Indsættelse Værktøjer (Indsæt QR-kode, Indsæt billede fra sti, ...)   |   12 Konvertering Værktøjer (Tal til ord, Valutaomregning, ...)   |   7 Flet og del Værktøjer (Avancerede kombinere rækker, Opdel celler, ...)   |   ... og mere

Overlad dine Excel-færdigheder med Kutools til Excel, og oplev effektivitet som aldrig før. Kutools til Excel tilbyder over 300 avancerede funktioner for at øge produktiviteten og spare tid.  Klik her for at få den funktion, du har mest brug for...

Beskrivelse

Fanen Office bringer en grænseflade til et kontor med Office, og gør dit arbejde meget lettere

  • Aktiver redigering og læsning af faner i Word, Excel, PowerPoint, Publisher, Access, Visio og Project.
  • Åbn og opret flere dokumenter i nye faner i det samme vindue snarere end i nye vinduer.
  • Øger din produktivitet med 50 % og reducerer hundredvis af museklik for dig hver dag!
Comments (17)
Rated 4 out of 5 · 1 ratings
Nicholas Guarino
Nicholas Guarino
This comment was minimized by the moderator on the site
I just wanted to leave my experience after reading the comments left here when in need of accomplishing entire columns needing to correlate to their respective rows under another column.
I hope I can help out the community for anyone else in search for answers with the same needs as I had.

This example is if you need each cell to act independently according to a cell in its own respective row. For example: Looking at row 4 I need my cell in column H to change color based on a value in column F (still in row 4). Lets say in this case I need H4 to change when the word Complete is entered in F4. (But I need this rule to apply for all rows. -Lets say I have 104 rows total.)

Conditional Formatting: New Rule > "Use a formula to determine which cells to format" - Format values where this formula is true: (enter the following) =$F1:$F104="Complete" (-Choose Format desired)
(We now need to add the cells this new rule applies to, enter the following) =$H$1:$H$104 > Apply > OK

You should now have independent rows formatting cells in column H dependent on the value "Complete" being entered in cells in column F.
Reply
0
0
Rated 4 out of 5
N
N
This comment was minimized by the moderator on the site
I have two column Buy Units (A) and Sell unites (B). When typing sell units B column, If B1>A1 return red font in B1 value. (To say that there is typo= you can not sale more unit than you have got) FOR EACH TRANSACTIONS. Meaning same to be applied for B2>A2, B3>A3., B4>A4... I do not want to keep typing Conditional Formating for each single cell, just want to COPY and Paste. This seems relatively easy ask but taking me a toll! Can you please help?
Reply
0
0
Nur Siddique
Nur Siddique     N
This comment was minimized by the moderator on the site
Yes I want learn/ know this
Reply
0
0
Shawn
Shawn
This comment was minimized by the moderator on the site
How do I solve this ?
Say I have 5 Columns - CORRECT_ANS, PERSON1, PERSON2, PERSON3, PERSON4
and say 4 rows with values as below.

CORRECT_ANS, PERSON1, PERSON2, PERSON3, PERSON4
A B C A A
B A B D B
C C C A B
C A D C C

Values in Columns PERSON1 to PERSON4 should match against corrresponding row in CORRECT_ANS. If value is same, then Cell color to be GREEN, else RED.
So in 1st case, PERSON3 and PERSON4 cell should be GREEN, rest RED. Similarly 2nd row, PERSON2 and PERSON4 gets GREEN, rest RED, and so on.
Reply
0
0
woogityboogidy
woogityboogidy
This comment was minimized by the moderator on the site
what if I want a cell to be shaded based on the presence or absence of text in a different cell?
Reply
Report
0
0
Avinash
Avinash     woogityboogidy
This comment was minimized by the moderator on the site
If you want the condition to format several cells on the same row, select them all and use the formula =$J1="your_text_here"
Reply
0
0
Patrick
Patrick
This comment was minimized by the moderator on the site
HI what if I want to condition a cell based on the presence or not of text in a different cell?
Reply
0
0
ES Alexander
ES Alexander
This comment was minimized by the moderator on the site
To apply this to multiple rows, use the same formula (Excel automatically continues the formula with relative values).
e.g. for the following sheet,
_|_A_B
1| 0 0
2| 0 1
3| 1 0
4| 1 1
to make A1 depend on B1, and A2 depend on B2, and so forth, use =$B1=0. To make all the cells in A depend on one cell in B, use =$B$1=0, and to make the cells in A depend on the cells in the next row of B, use =$B2=0 (with the A cells selected from A1).
Reply
0
0
kendozico@gmail.com
This comment was minimized by the moderator on the site
Ho do I apply this rule by row
For example, I want Cell I2 to be formatted by G2. I3 by G3 and so on
Reply
Report
0
0
Aidan
Aidan    
This comment was minimized by the moderator on the site
Hey for doing it by row, let's say I want to make A red when B > 0.

For that I would go to A, and enter the formula =B:B > 0

That's how you would do this
Reply
0
0
Vicky
Vicky     Aidan
This comment was minimized by the moderator on the site
Hi,
I want to dpo the following. Help me out.
A1 to be green if B1>0
A2 to be green if B1>0
.
.
.
.
A250 to be green if B250>0

I am unable to copy the formula to all the rows.
Reply
0
0
Thancos Kakinada
Thancos Kakinada
This comment was minimized by the moderator on the site
How can we apply the rule on multiple cells with a single formula? Applying the rule on every single cell will be a hectic job.
Reply
0
0
Deb
Deb
This comment was minimized by the moderator on the site
How might i format column N to be shaded according to value in column L? (Eg higher red, lower blue, equals green, no value - no shading)
Can i write a formula for column N in conditional formatting?

K L M N
DD 0.2 0.8

AM 0.8 1.0

TB 1.0 1.0

AM 1.0 1.0

TB 0.6 0.8

AM 0.4 0.4

AM 0.8 0.8


Any help appreciated
D
Reply
0
0
crystal
crystal     Deb
This comment was minimized by the moderator on the site
Hi Deb,
Sorry can't help you with that. Thank you for your comment.
Reply
Report
0
0
Aidan
Aidan     crystal
This comment was minimized by the moderator on the site
Hey Deb and Crystal,

For doing it by row, let's say I want to make A red when B > 0.

For that I would go to A, and enter the formula =B:B > 0

That's how you would do this
Reply
0
0
Manish
Manish
This comment was minimized by the moderator on the site
i want to know formula for color change of cell on basis of two different cell values
Reply
0
0
crystal
crystal     Manish
This comment was minimized by the moderator on the site
Hi Manish,
Please try this formula =AND($A2="KTE", $B2>100)
Reply
Report
0
0
There are no comments posted here yet
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations