Gå til hovedindhold

 Hvordan tælles det maksimale antal på hinanden følgende positive / negative tal i Excel?

Hvis du har en liste over data, der blandes med positive og negative tal, og nu vil du tælle det maksimale antal på hinanden følgende positive og negative tal som vist nedenstående skærmbillede, hvordan kan du håndtere denne opgave i Excel?

Tæl det maksimale antal på hinanden følgende positive og negative tal med matrixformler

Tæl det maksimale antal på hinanden følgende positive og negative tal med matrixformler

 

 

For at få det maksimale antal på hinanden følgende positive og negative tal skal du anvende følgende matrixformler:

Tæl det maksimale antal på hinanden følgende positive tal:

Indtast denne formel i en celle, hvor du vil få resultatet:

=MAX(FREQUENCY(IF(A2:A20>0,ROW(A2:A20)),IF(A2:A20<=0,ROW(A2:A20)))), og tryk derefter på Ctrl + Skift + Enter nøgler sammen, og du får det korrekte resultat efter behov, se skærmbillede:

Tæl det maksimale antal på hinanden følgende negative tal:

Indtast denne formel i en celle, hvor du vil få resultatet:

=MAX(FREQUENCY(IF(A2:A20<0,ROW(A2:A20)),IF(A2:A20>=0,ROW(A2:A20)))), og tryk derefter på Ctrl + Skift + Enter nøgler samtidigt, og du får resultatet efter behov, se skærmbillede:

Bemærk: I ovenstående formler A2: A20 er listen over celleområdet, som du vil bruge.

 

Bedste kontorproduktivitetsværktøjer

🤖 Kutools AI Aide: Revolutionér dataanalyse baseret på: Intelligent udførelse   |  Generer kode  |  Opret brugerdefinerede formler  |  Analyser data og generer diagrammer  |  Aktiver Kutools funktioner...
Populære funktioner: Find, fremhæv eller identificer dubletter   |  Slet tomme rækker   |  Kombiner kolonner eller celler uden at miste data   |   Runde uden formel ...
Super opslag: VLookup med flere kriterier  |   Multiple Value VLookup  |   VOpslag på tværs af flere ark   |   Fuzzy Lookup ....
Avanceret rulleliste: Opret hurtigt rulleliste   |  Afhængig rulleliste   |  Multivælg rulleliste ....
Column Manager: Tilføj et bestemt antal kolonner  |  Flyt kolonner  |  Skift synlighedsstatus for skjulte kolonner  |  Sammenlign områder og kolonner ...
Fremhævede funktioner: Grid fokus   |  Designvisning   |   Stor Formel Bar   |  Arbejdsbog & Ark Manager   |  Ressourcebibliotek (Autotekst)   |  Datovælger   |  Kombiner regneark   |  Krypter/Dekrypter celler   |  Send e-mails efter liste   |  Superfilter   |   Specielt filter (filter fed/kursiv/gennemstreget...) ...
Top 15 værktøjssæt:  12 tekst Værktøjer (tilføje tekst, Fjern tegn, ...)   |   50 + Chart Typer (Gantt kort, ...)   |   40+ Praktisk formler (Beregn alder baseret på fødselsdag, ...)   |   19 Indsættelse Værktøjer (Indsæt QR-kode, Indsæt billede fra sti, ...)   |   12 Konvertering Værktøjer (Tal til ord, Valutaomregning, ...)   |   7 Flet og del Værktøjer (Avancerede kombinere rækker, Opdel celler, ...)   |   ... og mere

Overlad dine Excel-færdigheder med Kutools til Excel, og oplev effektivitet som aldrig før. Kutools til Excel tilbyder over 300 avancerede funktioner for at øge produktiviteten og spare tid.  Klik her for at få den funktion, du har mest brug for...

Beskrivelse

Fanen Office bringer en grænseflade til et kontor med Office, og gør dit arbejde meget lettere

  • Aktiver redigering og læsning af faner i Word, Excel, PowerPoint, Publisher, Access, Visio og Project.
  • Åbn og opret flere dokumenter i nye faner i det samme vindue snarere end i nye vinduer.
  • Øger din produktivitet med 50 % og reducerer hundredvis af museklik for dig hver dag!

 

Comments (20)
Rated 5 out of 5 · 1 ratings
Siddhardha
Siddhardha
This comment was minimized by the moderator on the site
PPPPPPPQQQQPPPPQQPPQQPPPPPP

I have a data like above. I have applied the formula that you have suggested. It was working fine. Answer was 7.

={MAX(FREQUENCY(IF(A4:AA4=P, COLUMN(A4:AA4)),IF(A4:AA4<>P, COLUMN(A4:AA4))))}
But now my requirement is this formula should consider only the last 10 cells from the formula applied cells. and the answer should come as 6.
Is it Possible.
Please suggest a way
Reply
0
0
Naveen
Naveen
This comment was minimized by the moderator on the site
Hi,
This was very useful. Thank You very much !!
A question, what if in the data array I want to ignore blanks or zeros. Like the if the next number after blank or zero is positive it should add in frequency

Thanks for your help
Reply
0
0
skyyang
skyyang     Naveen
This comment was minimized by the moderator on the site
Hello, Naveen
To solve your problem, please try the below formula:
=MAX(FREQUENCY(IF(A2:A20>=0,ROW(A2:A20)),IF(A2:A20<0,ROW(A2:A20))))

After copying and pasting the formula, please remember to press Ctrl + Shift + Enter keys together to get the correct result.
Please try, hope it can help you!
Reply
Report
0
0
손님
손님
This comment was minimized by the moderator on the site
안녕하세요. 감사합니다. 데이터 필터된 상황의 경우에도 연속 손실이나 이익 수를 계산할 수 있는지 궁금합니다. 그리고 데이터 필터된 상횡의 평균 연속손실 수를 계산하는 방법은 있습니까?
Reply
0
0
Rated 5 out of 5
Will
Will
This comment was minimized by the moderator on the site
Wonderful, thank you! I'm using your formula now, but I have a question: Is there any way to further filter the data so that it only counts consecutive positive/negative cells IF they share a value in a different column? For example, if, using your example above, in Column B (next to your Number List in Column A) the cells were filled with either the letter 'A' or 'B' in random order, what formula would you use to determine the max number of positive cells that are ALSO consecutive A's in Column B?
Reply
0
0
An
An
This comment was minimized by the moderator on the site
It's amazing, just wondering if there a way to highlight consecutives?
Reply
0
0
Pablo Nunez
Pablo Nunez
This comment was minimized by the moderator on the site
I get an #Value output if there are only a streak of positive numbers only. Also, I get the same error, if there is only negative streak of numbers. It works fine when there are at least 1 positive and at least 1 negative number on the column. Does anybody knows how to fix this issue. I am using open office.Which uses the same commands, except for the " ; " instead of " , " as a separator.
Reply
0
0
skyyang
skyyang     Pablo Nunez
This comment was minimized by the moderator on the site
Hello, Pablo,
The formulas work well in my wotksheet when there are a list of positive or negative numbers, do you press Ctrl + Shift + Enter keys together to get the result?
View Attachments (1 / 5)
Reply
Report
0
0
Adrien
Adrien
This comment was minimized by the moderator on the site
Hello,
Tank you for this post.I'm trying to get the average number of consecutive negative number from a row.I've been trying to do it myself but I can't figure it out.
Would you mind helping me ?
Thanks !
Reply
0
0
Finansal Modeller
Finansal Modeller
This comment was minimized by the moderator on the site
So, usefull context. I was jus making a video for my Youtube Channel. When i googeled some key word, i came across with your formula. First of all, thank you. And secondly i will give reference to this website for the formulas explanation. I have not so many subscriber, but it may give your website a littele bit more traffic. Thank you and have nice day.
Reply
0
0
Joan
Joan
This comment was minimized by the moderator on the site
Hi, thank you very much for the information! It's very useful :) I wondering if is posible to add up the Max Number of consecutive negatives? I will apreciate a lot if you can help me. Thank you!!
Reply
0
0
skyyang
skyyang     Joan
This comment was minimized by the moderator on the site
Hi, Joan,
To solve your problem, please do with the following array formula:

Sum max number of consecutive positive numbers: (Note: D2 is the cell of the consecutive positive numbers you have counted by the using the formula in this article, please press Ctrl + Shift + Enter keys together)
=MAX((COUNTIF(OFFSET(A2:A18,ROW(A2:A18)-ROW(A2),0,D2),">=0")=D2)*SUBTOTAL(9,OFFSET($A$2:$A$18,ROW(A2:A18)-ROW($A$2),0,D2)))

Sum max number of consecutive negative numbers: (Note: E2 is the cell of the consecutive negative numbers you have counted by the using the formula in this article, please press Ctrl + Shift + Enter keys together)
=MIN((COUNTIF(OFFSET(A2:A18,ROW(A2:A18)-ROW(A2),0,E2),"<0")=E2)*SUBTOTAL(9,OFFSET($A$2:$A$18,ROW(A2:A18)-ROW($A$2),0,E2)))

Please try, hope it can help you!
View Attachments (1 / 5)
Reply
Report
0
0
Abdul Latif
Abdul Latif
This comment was minimized by the moderator on the site
how do you count consecutive occurrences of two different values or numbers
Reply
0
0
There are no comments posted here yet
Load More
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations