Gå til hovedindhold

Hvordan køres den samme makro på flere regneark på samme tid i Excel?

Normalt kan vi køre en makro i et regneark. Hvis der er flere ark, der har brug for at anvende den samme makro, skal du udløse koden et efter et ark. Hvis der er nogen anden hurtig måde at køre den samme makro på flere regneark på i Excel?

Kør eller udfør den samme makro på flere regneark på samme tid med VBA-kode


Kør eller udfør den samme makro på flere regneark på samme tid med VBA-kode

For at køre en makro på flere ark på samme tid uden at udløse det et efter et ark, kan du anvende følgende VBA-kode, gør som dette:

1. Hold nede ALT + F11 nøgler til at åbne Microsoft Visual Basic til applikationer vindue.

2. Klik indsatte > Moduler, og indsæt følgende makro i Moduler Vindue.

VBA-kode: Kør den samme makro på flere regneark på samme tid:

Sub Dosomething()
    Dim xSh As Worksheet
    Application.ScreenUpdating = False
    For Each xSh In Worksheets
        xSh.Select
        Call RunCode
    Next
    Application.ScreenUpdating = True
End Sub
Sub RunCode()
    'your code here
End Sub

Bemærk: I ovenstående kode skal du kopiere og indsætte din egen kode uden Under overskrift og End Sub sidefod mellem Under Runcode () , End Sub scripts. Se skærmbillede:

doc kør makro i alle ark 1

3. Sæt derefter markøren ved den første del makro, og tryk på F5 nøgle til at køre koden, og din makrokode vil blive anvendt på et efter et ark.


Fjern alle makroer fra flere projektmapper:

Kutools til Excel's Batch Fjern alle makroer hjælpeprogram kan hjælpe dig med at fjerne alle makroer fra flere projektmapper, som du har brug for. Download og gratis prøveversion Kutools til Excel nu!

doc kør makro, hvis celle ændres 3

Kutools til Excel: med mere end 300 praktiske Excel-tilføjelsesprogrammer, gratis at prøve uden begrænsning på 30 dage. Download og gratis prøveversion nu!

Bedste kontorproduktivitetsværktøjer

🤖 Kutools AI Aide: Revolutionér dataanalyse baseret på: Intelligent udførelse   |  Generer kode  |  Opret brugerdefinerede formler  |  Analyser data og generer diagrammer  |  Aktiver Kutools funktioner...
Populære funktioner: Find, fremhæv eller identificer dubletter   |  Slet tomme rækker   |  Kombiner kolonner eller celler uden at miste data   |   Runde uden formel ...
Super opslag: VLookup med flere kriterier    Multiple Value VLookup  |   VOpslag på tværs af flere ark   |   Fuzzy Lookup ....
Avanceret rulleliste: Opret hurtigt rulleliste   |  Afhængig rulleliste   |  Multivælg rulleliste ....
Column Manager: Tilføj et bestemt antal kolonner  |  Flyt kolonner  |  Skift synlighedsstatus for skjulte kolonner  |  Sammenlign områder og kolonner ...
Fremhævede funktioner: Grid fokus   |  Designvisning   |   Stor Formel Bar    Arbejdsbog & Ark Manager   |  Ressourcebibliotek (Autotekst)   |  Datovælger   |  Kombiner regneark   |  Krypter/Dekrypter celler    Send e-mails efter liste   |  Superfilter   |   Specielt filter (filter fed/kursiv/gennemstreget...) ...
Top 15 værktøjssæt12 tekst Værktøjer (tilføje tekst, Fjern tegn, ...)   |   50 + Chart Typer (Gantt kort, ...)   |   40+ Praktisk formler (Beregn alder baseret på fødselsdag, ...)   |   19 Indsættelse Værktøjer (Indsæt QR-kode, Indsæt billede fra sti, ...)   |   12 Konvertering Værktøjer (Tal til ord, Valutaomregning, ...)   |   7 Flet og del Værktøjer (Avancerede kombinere rækker, Opdel celler, ...)   |   ... og mere

Overlad dine Excel-færdigheder med Kutools til Excel, og oplev effektivitet som aldrig før. Kutools til Excel tilbyder over 300 avancerede funktioner for at øge produktiviteten og spare tid.  Klik her for at få den funktion, du har mest brug for...

Beskrivelse


Fanen Office bringer en grænseflade til et kontor med Office, og gør dit arbejde meget lettere

  • Aktiver redigering og læsning af faner i Word, Excel, PowerPoint, Publisher, Access, Visio og Project.
  • Åbn og opret flere dokumenter i nye faner i det samme vindue snarere end i nye vinduer.
  • Øger din produktivitet med 50 % og reducerer hundredvis af museklik for dig hver dag!
Comments (16)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
The original macro "How to run the same macro on multiple worksheets at same time in Excel" is fantastic for my purposes, thanks so much. I was wondering if there's a way to get it to return to the first worksheet where I have a control to run the macro. Currently it goes through 25 worksheets doing my code (autofit & Sort by date) and stops once it's done the last worksheet of the 25. Returning to the first sheet would be the icing on the cake! Thanks in advance for thinking about this.
This comment was minimized by the moderator on the site
is there a way to only do it on selected worksheets and not all?
This comment was minimized by the moderator on the site
Hello, karen,
To run the code on selected sheet, please apply the below code:
Step1: Copy anf paste the below code into the Module Window
'Replace this code with your own, but keep the script inside the parentheses
Sub LCase(ws As Worksheet)
Dim Rng As Range
Dim WorkRng As Range
On Error Resume Next
xTitleId = "KutoolsforExcel"
Set WorkRng = Application.Selection
Set WorkRng = Application.InputBox("Range", xTitleId, WorkRng.Address, Type:=8)
For Each Rng In WorkRng
    Rng.Value = VBA.LCase(Rng.Value)
Next
End Sub

Sub RunOnSelectedSheets()
    Dim ws As Worksheet
    For Each ws In ActiveWindow.SelectedSheets
        LCase ws    'change the LCase code name to your own code name
    Next ws
End Sub



Step2: Replace the first section of code above with your own code, but keep the script inside the parentheses. And change the LCase code name to your own code name.

Step3: Then, select the worksheet you want to run this code.
After running the code, your code will be executed on each of the selected sheets.

Please have a try, hope it can help you!
This comment was minimized by the moderator on the site
Terimakasih sebelumnya atas ilmu ilmu yg sudah di share. Saya sudah memakai beberapa VBA anda.

Tapi bolehkan saya meminta tolong untul mencarikan VBA yg tepat untuk mengaktifkan VBA yg sudah ada di sheet tertentu tanpa harus masuk ke sheet tersebut.

Contohnya.
Saya sudah menggunakan vBA anda yg berfungsi untuk mengurutkan data secara otomatis.

Tetapi ketika data yg saya terapkan itu berubah karena hasil pencarian data dari sheet yg berbeda. vBA tersebut tidak aktif. Harus terlebih dahulu masuk ke Sheet Tersebut untuk merubah data dengan manual barulah VBa pengurutan dat tersebut aktif.

Bisakah dicarikan VBA nya?
This comment was minimized by the moderator on the site
It works, but the current sheet is always running twice. The rest sheets are perfect and run only once!
This comment was minimized by the moderator on the site
Hello, hou,
May be you can use the below code to your need:
Sub WorksheetLoop()
         Dim Current As Worksheet
         For Each Current In Worksheets

          'Insert your code here.
           
      End Sub


Note: In the above code, please copy and paste your own code without the Sub heading and End Sub footer.

Please try, hope it can help you!
This comment was minimized by the moderator on the site
Thank you so much! But it's not working. It only runs the current sheet for several times.
This comment was minimized by the moderator on the site
How do you exclude certain sheets and add On Error Resume Next? Thanks in advance
This comment was minimized by the moderator on the site
Before xSh.selectyou have to activate
So,xSh.activatexSh.select
This comment was minimized by the moderator on the site
The code "Run the same macro on multiple worksheets at same time" works perfectly, Thanks !

However I have this error at "xSh.Select" and I don't know why...there is no issue visible in the sheets... AND I don't have any hidden sheets.

The error is '1004': Method'Select' of object '_Worksheet' failed


Thanks in advance for your help
This comment was minimized by the moderator on the site
For those wiFor those with 1004 runtime error, verify you don´t have any hidden sheets. If you do, unhide them. Then this code snippet works. Greetings.th 1004 runtime error, verify you don´t have any hidden sheets. If you do, unhide them. Then this code snippet works. Greetings.
This comment was minimized by the moderator on the site
Is there a way to make this run only on unhidden sheets? I need this code to run only on visible sheets.
This comment was minimized by the moderator on the site
or
On Error Resume Next

'above

xSh.Select

This comment was minimized by the moderator on the site
1004 runtime error
This comment was minimized by the moderator on the site
Sub Dosomething()
Dim xSh As Worksheet
Application.ScreenUpdating = False
For Each xSh In Worksheets
xSh.Select
Call RunCode
Next
Application.ScreenUpdating = True
End Sub
Sub RunCode()
With Worksheets("2018")
.EnableOutlining = True
.EnableSelection = xlNoRestrictions
.Protect Password:="workana1234", _
Contents:=True, UserInterfaceOnly:=True
End With
End Sub


Hola! he seguido las pautras pero me señala como error la fila xSh.Select.

Al dar F5 me indica que se ha producido un error 1004 en tiempo de ejecucion.

Error en el metodo "Select" de Objeto "_Worksheet"



Help!!!!
This comment was minimized by the moderator on the site
On Error Resume Next
above
xSh.Select
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations