Gå til hovedindhold

Hvordan forhindres Outlook i at bede om udveksling af legitimationsoplysninger hver gang?

Er du blevet bedt om udvekslingsoplysninger, når du åbner Microsoft Outlook? Hvis ja, bemærker du muligvis, at Windows Sikkerhedsdialogboks vises, når Outlook startes hver gang. Se skærmbillede nedenfor. Normalt kan du løse dette problem ved at kontrollere Husk mine legitimationsoplysninger efter indtastning af dine legitimationsoplysninger, og klik på OK .

I nogle specielle tilfælde beder det dog om udvekslingsoplysninger hver gang, når du starter Microsoft Outlook, men der er ingen mulighed for Husk min legitimationsoplysninger overhovedet i pop op-Windows-dialogboksen. (Se følgende skærmbillede.) I denne artikel vil jeg guide dig til at løse dette problem og forhindre Microsoft Outlook i at bede om udvekslingsoplysninger ved hurtigt at konfigurere kontoindstillinger.

Office-faneblad - Aktiver fanebaseret redigering og browsing i Microsoft Office, hvilket gør arbejdet til en leg
Kutools til Outlook - Boost Outlook med 100+ avancerede funktioner for overlegen effektivitet
Boost din Outlook 2021 - 2010 eller Outlook 365 med disse avancerede funktioner. Nyd en omfattende 60-dages gratis prøveperiode og løft din e-mail-oplevelse!

For at forhindre Microsoft Outlook i at bede om udvekslingsoplysninger hver gang, når du starter, skal du ændre nogle udvekslingsindstillinger i Kontoindstillinger. Gør som følger:

Trin 1: Åbn dialogboksen Kontoindstillinger:

  1. I Outlook 2007 skal du klikke på Værktøjer > Kontoindstillinger;
  2. I Outlook 2010 og 2013 skal du klikke på File (Felt) > INFO > Kontoindstillinger > Kontoindstillinger.

Trin 2: I dialogboksen Kontoindstillinger,

  1. Gå til E-mail fanen;
  2. Klik for at fremhæve den udvekslingskonto, der beder om loginoplysninger hver gang, når du åbner Microsoft Outlook;
  3. Klik på knappen Skift .

Trin 3: I den nye dialogboks under Skift konto skal du klikke på Flere indstillinger .

Trin 4: I pop op-dialogboksen Microsoft Exchange,

  1. Gå til Sikkerhed fanen;
  2. Fjern markeringen af ​​muligheden for Spørg altid om påloggingsoplysninger;
  3. Klik på knappen OK .

Trin 5: Nu vender du tilbage til dialogboksen Skift konto, skal du klikke på Næste -knappen og Finish knappen successivt.

Trin 6: Klik på Luk for at afslutte dialogboksen Kontoindstillinger.

Efter at have konfigureret sikkerhedsindstillingerne for den angivne udvekslingskonto, vises den ikke i dialogboksen og beder om udvekslingslegitimation, når du åbner Microsoft Outlook længere.

Bedste kontorproduktivitetsværktøjer

Kutools til Outlook - Over 100 kraftfulde funktioner til at superlade din Outlook

🤖 AI Mail Assistant: Øjeblikkelige pro-e-mails med AI-magi – et klik for geniale svar, perfekt tone, flersproget beherskelse. Forvandl e-mailing ubesværet! ...

📧 Email Automation: Ikke til stede (tilgængelig til POP og IMAP)  /  Planlæg Send e-mails  /  Auto CC/BCC efter regler ved afsendelse af e-mail  /  Automatisk videresendelse (avancerede regler)   /  Tilføj automatisk hilsen   /  Opdel automatisk e-mails med flere modtagere i individuelle meddelelser ...

📨 Email Management: Genkald nemt e-mails  /  Bloker svindel-e-mails af emner og andre  /  Slet duplikerede e-mails  /  Avanceret søgning  /  Konsolider mapper ...

📁 Vedhæftede filer Pro: Batch Gem  /  Batch adskilles  /  Batch komprimere  /  Automatisk gem   /  Automatisk afmontering  /  Automatisk komprimering ...

🌟 Interface Magic: 😊 Flere smukke og seje emojis   /  Boost din Outlook-produktivitet med fanebaserede visninger  /  Minimer Outlook i stedet for at lukke ...

👍 Wonders med et enkelt klik: Besvar alle med indgående vedhæftede filer  /   Anti-phishing e-mails  /  🕘Vis afsenderens tidszone ...

👩🏼‍🤝‍👩🏻 Kontakter og kalender: Batch Tilføj kontakter fra udvalgte e-mails  /  Opdel en kontaktgruppe til individuelle grupper  /  Fjern fødselsdagspåmindelser ...

Over 100 Features Afvent din udforskning! Klik her for at finde mere.

Læs mere       Gratis download      Køb
 

 

Comments (41)
No ratings yet. Be the first to rate!
bennywoddle@gmail.com
This comment was minimized by the moderator on the site
For non-experienced user

Close down outlook completely

1
Control Panel > (view by icons, not categories) > mail > Show Profiles > Add > (call it whatever you like) > change the dropdown to the new one you just created
This will recreate the profile settings and you will need to re-add your mailboxes

2
C:\users\(you username)\appdata(this is hidden so make sure you can see hidden files - google guides available for this)local\microsoft\outlook
eg
C:\users\BEN\appdata\local\microsoft\outlook
This file, rename it to "Outlookold"
(this backs up the file so we can get it back by changing the name back to "Outlook" if need be - if the fix works, delete this to save yourself some space after you're done)



3
NOW, this is the first time you should be trying to open outlook - it will take a while but should load up after recreating the configuration folder and the configuring your account - then just re-add your mailbox(es).




For experienced users
*insert disclaimer about being careful with RegEdit*

reg delete "\\%asset%\HKEY_USERS\%SID%\Software\Microsoft\Office\16.0\Outlook\Profiles\Outlook"



For super users

*insert disclaimer about being careful with RegEdit*
HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook\Profiles
locate the mail profile that's active
go to 9375CFF0413111d3b88a00104b2a6676
Find which one has the affected mailbox in "Account Name"
Note the "Service UID" - go to the binary value in the "Profile" key that we're in
in here, find the REG_BINARY for "01023d0d" and make a note of the binary - go to the binary value in the "Profile" key that we're in
Right Click > New > Binary Value

Name = 00036619
Value = 01 f0 00 80
Reply
Report
0
0
terry
terry
This comment was minimized by the moderator on the site
my box is NOT checked. This is not the solution.
Reply
0
0
Chinziri
Chinziri
This comment was minimized by the moderator on the site
My laptop running Windows 8.1 and using MS Outlook 2013 has all those setting correct ie as you described them but still I getting this annoying Windows Security popup that requires me to enter password everytime I start MS Outlook. What could be another problem for this occurence.
Reply
0
0
hal9bates@gmail.com
This comment was minimized by the moderator on the site
M$ is a sack of poo. I can't believe nobody has come up with a professional mail, calendar and contacts package to rival this sack of horse sh*t. The button was already unchecked so this did not help with a recurring problem.
Reply
Report
0
0
Tiago
Tiago
This comment was minimized by the moderator on the site
To me was necessary one step more:
Change the option "logon network security" to "password authentication" instead "negotiate authentication" on Exchange settings window.
Reply
0
0
Dude
Dude
This comment was minimized by the moderator on the site
How to access outlook if I forgot my credentials (Windows Security)?
Reply
0
0
jackie
jackie
This comment was minimized by the moderator on the site
Hayley... so you ticked it and THAT solved the problem, really? That doesn't make sense.
Reply
0
0
David Hutchins
David Hutchins
This comment was minimized by the moderator on the site
The option to click on or off to always prompt for logon credentials is grayed out and I can't select it.
Reply
0
0
Hayley
Hayley
This comment was minimized by the moderator on the site
so , I went in and my ' always prompt ' was also not ticked. I ticked it and it has fixed the problem.
Reply
0
0
Lisa
Lisa
This comment was minimized by the moderator on the site
I worked through all of these steps above, but got to the last step and the box "Always prompt for logon credentials" was already unchecked. The problem is still there.
Reply
0
0
Rick
Rick     Lisa
This comment was minimized by the moderator on the site
I have the same problem.

Did you ever get yours fixed. IF so what did you do?
Reply
0
0
Stu
Stu     Rick
This comment was minimized by the moderator on the site
You need to go to Control Panel > Users > Manage Your Credentials (link on the left hand side of Windows 10 Explorer) > Windows Credentials > :

Under Generic credentials, look for "MS.Outook.15:[YOUR ACCOUNT NAME]". If there are two entries for the same account, delete the one which ends in "PUT". This should fix your problem. The problem arises where two or more entries/keys exist and Outlook does not know which one to use, so it requests on start-up of the program.



Before doing so however, I would advise you to back up your credentials.
Reply
1
0
Allan
Allan     Stu
This comment was minimized by the moderator on the site
Thanks Stu, that worked perfectly for me... although I didn't have a "PUT" entry, just 2 entries for the same account.... deleted them both and at next Outlook restart entered the correct credentials, ticked the "remember" box and worked fine ever since. Problem occurred because my exchange account had been deleted and then re-created with same e-mail and new password.
Reply
0
0
JustJes
JustJes     Allan
This comment was minimized by the moderator on the site
Allan, mine happened the same way! Although I was weary about deleting anything so I just updated the credentials to the new passwords and all is well in La La land!
Reply
0
0
clw
clw     JustJes
This comment was minimized by the moderator on the site
Encountered a similar situation with an academic email account. The same password was being used according to Windows credentials, although the automatically assigned username was supposed to be "blank" according to the Windows credentials. I logged in first using the automatic username (which I could not edit without changing the account). The prompt re-appeared immediately after, although with the option to change the username. I left the username blank and entered only the password to sign in. I haven't experienced any more prompts. Thank-you for the tip!
0
0
There are no comments posted here yet
Load More
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations