Gå til hovedindhold

Hvordan får jeg en prompt eller bekræftelse, før du sender e-mails i Outlook?

I mange gange har du sendt en e-mail og indset, at du går glip af noget vigtigt, eller at der vises noget galt i e-mailen et par sekunder senere. Hvordan undgår jeg at sende pinlig e-mail i Outlook? Faktisk kan du bekræfte at sende e-mailen igen, når du har trykket på knappen Send i Outlook. Metoden i denne artikel kan hjælpe dig med at vise problemet.

Få en prompt eller bekræftelse, inden du sender e-mails med VBA-kode


Få en prompt eller bekræftelse, inden du sender e-mails med VBA-kode

Følgende VBA-kode kan hjælpe dig med at bekræfte afsendelse af e-mail igen, når du har trykket på knappen Send i Outlook. Gør som følger.

1. Tryk på andre + F11 nøgler til at åbne Microsoft Visual Basic til applikationer vindue.

2. i Microsoft Visual Basic til applikationer dobbeltklik for at åbne Denne OutlookSession kodevindue, og kopier derefter under VBA-kode til kodevinduet.

VBA-kode: Få en bekræftelse, inden du sender e-mails i Outlook

Private Sub Application_ItemSend(ByVal Item As Object, Cancel As Boolean)
Dim xPrompt As String
Dim xOkOrCancel As Integer
On Error Resume Next
xPrompt = "Do you want to continue sending the email?"
xOkOrCancel = MsgBox(xPrompt, vbOKCancel)
If xOkOrCancel <> vbOK Then
    Cancel = True
End If
End Sub

3. Tryk på andre + Q taster for at lukke Microsoft Visual Basic til applikationer vindue.

Fra nu af, når du trykker på Send knappen for at sende en e-mail i Outlook, vil en bekræftelsesdialogboks dukke op, som skærmbilledet nedenfor viste. Klik OK for at sende denne e-mail, klik Ophæve for at blive ved med at skrive e-mailen.

Bedste kontorproduktivitetsværktøjer

🤖 Kutools AI Aide: Revolutionér dataanalyse baseret på: Intelligent udførelse   |  Generer kode  |  Opret brugerdefinerede formler  |  Analyser data og generer diagrammer  |  Aktiver Kutools funktioner...
Populære funktioner: Find, fremhæv eller identificer dubletter   |  Slet tomme rækker   |  Kombiner kolonner eller celler uden at miste data   |   Runde uden formel ...
Super opslag: VLookup med flere kriterier    Multiple Value VLookup  |   VOpslag på tværs af flere ark   |   Fuzzy Lookup ....
Avanceret rulleliste: Opret hurtigt rulleliste   |  Afhængig rulleliste   |  Multivælg rulleliste ....
Column Manager: Tilføj et bestemt antal kolonner  |  Flyt kolonner  |  Skift synlighedsstatus for skjulte kolonner  |  Sammenlign områder og kolonner ...
Fremhævede funktioner: Grid fokus   |  Designvisning   |   Stor Formel Bar    Arbejdsbog & Ark Manager   |  Ressourcebibliotek (Autotekst)   |  Datovælger   |  Kombiner regneark   |  Krypter/Dekrypter celler    Send e-mails efter liste   |  Superfilter   |   Specielt filter (filter fed/kursiv/gennemstreget...) ...
Top 15 værktøjssæt12 tekst Værktøjer (tilføje tekst, Fjern tegn, ...)   |   50 + Chart Typer (Gantt kort, ...)   |   40+ Praktisk formler (Beregn alder baseret på fødselsdag, ...)   |   19 Indsættelse Værktøjer (Indsæt QR-kode, Indsæt billede fra sti, ...)   |   12 Konvertering Værktøjer (Tal til ord, Valutaomregning, ...)   |   7 Flet og del Værktøjer (Avancerede kombinere rækker, Opdel celler, ...)   |   ... og mere

Overlad dine Excel-færdigheder med Kutools til Excel, og oplev effektivitet som aldrig før. Kutools til Excel tilbyder over 300 avancerede funktioner for at øge produktiviteten og spare tid.  Klik her for at få den funktion, du har mest brug for...

Beskrivelse


Fanen Office bringer en grænseflade til et kontor med Office, og gør dit arbejde meget lettere

  • Aktiver redigering og læsning af faner i Word, Excel, PowerPoint, Publisher, Access, Visio og Project.
  • Åbn og opret flere dokumenter i nye faner i det samme vindue snarere end i nye vinduer.
  • Øger din produktivitet med 50 % og reducerer hundredvis af museklik for dig hver dag!
Comments (17)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Clicking on cancel , sends the message
This comment was minimized by the moderator on the site
Hi, I get an error message when I run this VBA code.The error is "Compile error: Sub or function not defined."
This comment was minimized by the moderator on the site
Hi the code is giving me an error saying "Compile error: Sub or Function not defined."What would be the cause for this?
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
The solution worked for me once but I couldn't get it to work for me again. Any suggestions how to do that?
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
This worked one time, after tha never worked again.
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
Hi There,

For some reason, mine, it works well only for one day. The codes don't seem to work anymore the next day, although those codes remained intact,

Anyone has such experience and know why?

Thanks.
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
Seeing same issue, any desired solution?
This comment was minimized by the moderator on the site
Same issue, it doesn't work for next day or after relaunching outlook, any solution?
This comment was minimized by the moderator on the site
Hi, i've got the same experience. Not sure yet how to solve this, i'm very new to VBA.
Would like to hear from you if you found a fix.
This comment was minimized by the moderator on the site
Hello! Very useful and it works perfectly.

Is it possible to adjust the code so that it only pops up when there is an attachment? Similarly, is it possible to adjust it so it prompts the pop-up only when the message is sent externally (not to people of the company)?
This comment was minimized by the moderator on the site
Hi There

Is it possible to get a message to come up only when an attachment is present, and only when sent externally?

Thank you very much!

Daniel
This comment was minimized by the moderator on the site
If you want the pop-up to only happen when you send to several emails, i.e. >10, how do you do that?

Oh and thanks, it works like a treat.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations