Gå til hovedindhold

Læs let / se et stort antal rækker og kolonner i Excel

Forfatter: Xiaoyang Sidst ændret: 2023-08-16

Kutools til Excel

Forøger Excel med 300+
Kraftfulde funktioner

Hvis du arbejder på, at regnearket indeholder enorme data med hundredvis af rækker og kolonner, kan du nemt få puslespil, mens du tjekker og springer dataene fra den ene til den anden, hvilket vil spilde tid. For at løse dette problem fremhæver Grid Focus-værktøjet i Kutools til Excel den tværgående række og kolonne for at gøre den aktive celle eller området fremragende som vist nedenfor. Demo

skudlæsningslayout 2


Aktiver Grid Focus-værktøjet

Klik Kutools > Grid fokus for at aktivere dette værktøj, mens Grid Focus er aktiveret, er fanen fremhævet.
skudlæsningslayout 2


Grid Focus indstillinger

Hvis du vil ændre indstillingerne såsom figurer, stilarter, farver eller gennemsigtighed, kan du gå til Gitterfokusindstillings dialog for at ændre.

Klik Kutools fanen, og gå til klik på pilen ved siden af Grid fokus for at udvide rullemenuen, og klik derefter på Indstillinger for gitterfokus.
skudlæsningslayout 2

I Indstillinger for gitterfokus dialog, kan du ændre de former, stilarter, farver og gennemsigtighed, som du har brug for, samtidig med at du kan forhåndsvise ændringen i Eksempel sektion, inden du anvender ændringerne.
skudlæsningslayout 2

Om Fremhæv området med den aktive celle og Fremhæv området til redigering af celle valgmuligheder.

Tick Fremhæv området med den aktive celle valgmulighed fremhæves den aktive celle eller det aktive område.

skudlæsningslayout 2

Fjern flueben Fremhæv området med den aktive celle indstilling, men marker afkrydsningsfeltet Fremhæv området til redigering af celle valgmulighed, vil den aktive celle eller række ikke blive fremhævet, men det overfyldte område er fremhævet.

skudlæsningslayout 2

Fjern markeringen af ​​begge dele Fremhæv området med den aktive celle og Fremhæv området til redigering af celle valgmuligheder, både den aktive celle eller det aktive område og det overfyldte område fremhæves ikke.

skudlæsningslayout 2

Aktiver Grid Focus: afkryd denne mulighed efter indstillinger og klik OK, vil Grid Focus blive automatisk aktiveret.

Standardindstillinger: klik på denne knap, indstillingerne for Grid Focus er blevet gendannet til standardindstillingerne for Kutools.


Bemærkninger:

1. Du kan annullere dette hjælpeprogram ved at klikke på Grid fokus kommando, skifter fanen til lysegrå.

2. Hvis du åbner flere Excel-filer, dette Grid fokus funktion anvendes på dem alle.

3. Dette Grid fokus aktiveres ikke automatisk, når du starter projektmappen næste gang.

Grid Focus Demo


Kutools til Excel: Over 300 praktiske værktøjer lige ved hånden! Start din 30-dages gratis prøveperiode uden funktionsbegrænsninger i dag. Hent nu!

    Produktivitetsværktøjer anbefales
    Følgende værktøjer kan i høj grad spare din tid og penge, hvilken er den rigtige for dig?
    Office-fanen: Brug af praktiske faner på dit Office, som vejen for Chrome, Firefox og New Internet Explorer.
    Kutools til Excel: Mere end 300 avancerede funktioner til Excel 2021, 2019, 2016, 2013, 2010, 2007 og Office 365.

    Kutools til Excel

    Den ovenfor beskrevne funktionalitet er kun en af ​​300 kraftfulde funktioner i Kutools til Excel.

    Designet til Excel(Office) 2021, 2019, 2016, 2013, 2010, 2007 og Office 365. Gratis download og brug i 30 dage.

    Skærmbillede af Kutools til Excel

    btn læs mere      btn-download     btn køb

Comments (17)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Why doesn't it open automatically at startup? it would be nice to remember the last setting
This comment was minimized by the moderator on the site
Hello, Mennan,
Sorry for the inconvenience, for the stability of the function, our feature is disabled when opening next time at present, but the last setting and operation can be remembered.
Thanks for your comment.
This comment was minimized by the moderator on the site
I have a problem with the reading layout. Every time when I start it, it behaves strangely. It "chose" a smaller size of the sheet than it is actually on my screen and it works in that sheet. Eg: if I see on my screen columns range from A up to AC and rows range from 1 up to 39, the reading layout chooses that my columns range from A up to half of X and rows range from 1 up to half of 32 and works in that let's call it window.
I tried to uninstall kutools and install it again, but the same problem remains.
Any wise advice would be appreciated from my side.
I am running MS office professional plus 2021.

Thanks in advance
This comment was minimized by the moderator on the site
I might detected the problem. I am running 3 displays, one from a laptop 15,6" and two others 24" over wavlink dock. All three displays are running at a resolution of 1920 x 1080. My main display is from the laptop.
I am using excel on another two 24" displays just because they have a bigger screen. When I put excel on the laptop window reading layout behaves as it should, and that is the exact size of the sheet that I previously described as a smaller window.
This comment was minimized by the moderator on the site
Hello, Dejan,
Thanks for your comment.
I have fed back this problem to the developers, if there is a an upgrade or fixed, we will let you know in the first time.
This comment was minimized by the moderator on the site
If you make this auto load when opening excel I will buy this product. :D
This comment was minimized by the moderator on the site
Hi, Andrei

Thanks for your comment, your suggestion has been fed back to the developers, if there's an upgrade, I'll let you know in the first time. 😄
This comment was minimized by the moderator on the site
Very Good Service Nice blog
This comment was minimized by the moderator on the site
Hello, Thanks for sharing this informative blog with us.
This comment was minimized by the moderator on the site
This feature is great. Bear in mind I had an existing Excel file where this button was ALWAYS disabled. I had to copy-and-paste the data out of the file and save it into a new file to get the "Reading Layout" button to enable. It then worked fine.
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.🙂
This comment was minimized by the moderator on the site
se eu compra a licença consigo instalar mais de uma vez no pc ou só serve uma vez ?
This comment was minimized by the moderator on the site
This solved one of my biggest headaches. I have one program that outputs a report that when exported to Excell it creates 200 worksheets! I have never been able to use it until now. Merging all of them into one worksheet only takes a few minutes with Kutools.
This comment was minimized by the moderator on the site
Thanks A lot of this product, mainly its use for reading layout & shortcuts of left side menu
This comment was minimized by the moderator on the site
My OS: Windows 7 Pro fully updated My Excel: 2010 My sheet: Range R1C6:R504C6 is in use PROBLEM: READING LAYOUT FAILS TO FILL ROW AND COLUMN SELECTED 1. Magnification: 60% 2. Rows 313-355 show 3. Cell R354:C6 selected 4. Column 5 fills to row 323. Row 354 no fill 5. Mag to 50% 6. Rows 311-357 show 7. Column 5 fills top to bottom. Row 354 fills left to right 8. Mag to 60%. Goto 4. 9. Mag to 70%. 10. Rows 319-354 show 11. Column 6 fills to row 325. Row 354 is empty. 12. Click R354:C6 13. No change! 14. WHY? NOTE: At 60% magnification selecting any cell on visible sheet on rows greater than 323 demonstrates same problem. Selecting row 323 or lower i.e R320 the function works as expected with row and column selected but only to row 323!
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations