Gå til hovedindhold

Sådan gendannes manglende Kør et script-valg i Outlook-reglen?

Forfatter: Kelly Sidst ændret: 2023-12-22

I visse versioner af Outlook, især i de seneste opdateringer, kan indstillingen "Kør et script" være deaktiveret som standard som en sikkerhedsforanstaltning. For at aktivere indstillingen "Kør et script" i Outlook, hvilket muliggør oprettelse af regler med VBA-scripts, skal du normalt ændre specifikke indstillinger i registreringsdatabasen. Fortsæt med at læse for detaljerede instruktioner om, hvordan du gør dette.

Aktiver manglende "Kør et script"-indstilling i Outlook

For at gendanne de manglende køre et script mulighed i guiden Outlook-regler, Sørg først for, at Outlook er lukket, og fortsæt derefter med følgende trin:

  1. Tryk Win + R nøgler sammen for at åbne Kør dialog boks. Skriv i denne dialogboks regedit og klik derefter på OK .
  2. I springende ud User Account Control Klik på dialogboksen Ja .
  3. I Registreringseditor vindue, naviger til nedenstående sti for at få adgang til Sikkerhed indstilling: HKEY_CURRENT_USER \ Software \ Microsoft \ Office \ 16.0 \ Outlook \ Security
  4. Højreklik på Sikkerhed og vælg Ny > DWORD (32-bit) Value.
  5. Navngiv den oprettede DWORD som EnableUnsafeClientMailRules.
  6. Dobbeltklik på EnableUnsafeClientMailRules DWORD for at åbne Rediger DWORD-værdi (32-bit) dialog boks. Type 1 i Valør boks og klik OK.
  7. Genstart din Microsoft Outlook.

Ved at følge trinene beskrevet ovenfor, vil du være i stand til at finde og bruge "kør et script", når du opretter regler i Outlook.

Relaterede artikler

Bedste kontorproduktivitetsværktøjer

Kutools til Outlook - Over 100 kraftfulde funktioner til at superlade din Outlook

🤖 AI Mail Assistant: Øjeblikkelige pro-e-mails med AI-magi – et klik for geniale svar, perfekt tone, flersproget beherskelse. Forvandl e-mailing ubesværet! ...

📧 Email Automation: Ikke til stede (tilgængelig til POP og IMAP)  /  Planlæg Send e-mails  /  Auto CC/BCC efter regler ved afsendelse af e-mail  /  Automatisk videresendelse (avancerede regler)   /  Tilføj automatisk hilsen   /  Opdel automatisk e-mails med flere modtagere i individuelle meddelelser ...

📨 Email Management: Genkald nemt e-mails  /  Bloker svindel-e-mails af emner og andre  /  Slet duplikerede e-mails  /  Avanceret søgning  /  Konsolider mapper ...

📁 Vedhæftede filer Pro: Batch Gem  /  Batch adskilles  /  Batch komprimere  /  Automatisk gem   /  Automatisk afmontering  /  Automatisk komprimering ...

🌟 Interface Magic: 😊 Flere smukke og seje emojis   /  Boost din Outlook-produktivitet med fanebaserede visninger  /  Minimer Outlook i stedet for at lukke ...

👍 Wonders med et enkelt klik: Besvar alle med indgående vedhæftede filer  /   Anti-phishing e-mails  /  🕘Vis afsenderens tidszone ...

👩🏼‍🤝‍👩🏻 Kontakter og kalender: Batch Tilføj kontakter fra udvalgte e-mails  /  Opdel en kontaktgruppe til individuelle grupper  /  Fjern fødselsdagspåmindelser ...

Over 100 Features Afvent din udforskning! Klik her for at finde mere.

Læs mere       Gratis download      Køb
 

 

Comments (26)
No ratings yet. Be the first to rate!
Graham
Graham
This comment was minimized by the moderator on the site
You switched from 32 bit to 64 bit without explanation. See "New > DWORD (32-BIT Value)" then after "6. In the Edit QWORD (64-BIT)". Which is it ? Or is it both?
Reply
0
0
Amanda Lee
Amanda Lee     Graham
This comment was minimized by the moderator on the site
Sorry for the confusion. It should be the DWORD (32-bit) Value. And I've fixed it in the tutorial. 🙂
Reply
Report
0
0
jrlongoria@gmail.com
This comment was minimized by the moderator on the site
You change from DWORD to QWORD at the end.
It should be DWORD
Reply
Report
0
0
Amanda Lee
Amanda Lee    
This comment was minimized by the moderator on the site
Thank you for bringing this to my attention. I've made the necessary correction in the tutorial.
Reply
Report
0
0
Max
Max
This comment was minimized by the moderator on the site
Great! Thanks
Reply
0
0
Ethan H
Ethan H
This comment was minimized by the moderator on the site
This worked for me in Outlook for Office 365. Once point to clarify, the instructions flip-flop between DWORD and QWORD, which are mutually exclusive. I used DWORD and it worked.
Reply
0
0
FerretWilliams
FerretWilliams
This comment was minimized by the moderator on the site
I also didn't have a security folder. To get around the issue, I set a rule to forward all emails fitting a specific rule to IFTTT so I can use their automation instead. Won't work for everybody, and attachments get a long number added to them if saving to Dropbox.
Reply
0
0
dan
dan     FerretWilliams
This comment was minimized by the moderator on the site
what applet did you use on IFTTT, or did you make your own?
Reply
0
0
FerretWilliams
FerretWilliams     dan
This comment was minimized by the moderator on the site
I set an email trigger, and set the action to be to save to Dropbox. However, I've since switched to Microsoft Flow for saving Gmail directly to Dropbox. My specific goal was to save Gmail attachments to Dropbox, and Flow worked best for that after IFTTT dropped support for reading emails from Gmail.
Reply
0
0
Sagar
Sagar
This comment was minimized by the moderator on the site
I Don't Have a security folder after HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook
Reply
0
0
IT Engineer
IT Engineer     Sagar
This comment was minimized by the moderator on the site
It's because Microsoft has yet again changed something concerning this feature. Most likely, this registry key path has completely changed, or has been outright omitted. I have a Premier Support ticket open with MS currently to have them provide us the CORRECT registry setting for Office2016/2019 current monthly channel to bring the Run a Script in Rules Actions back. It is completely unacceptable for MS to continue to alter/omit features like this without clear & priority notification to clients. I understand the security risks behind using such a feature, but in certain scenarios, this still is used.
Reply
0
0
Azza
Azza     IT Engineer
This comment was minimized by the moderator on the site
By playing around I found the correct key:
Computer\HKEY_USERS\{whichevertheuserkeyis}\Software\Microsoft\Office\16.0\Outlook\Security

So do not use HKEY_Current_User, instead use HKEY_USERS
Reply
0
0
Jason
Jason
This comment was minimized by the moderator on the site
This doesn't seem to work for Outlook 2013. Is there a method that will work for this version? Also, your instructions reference DWORD and the images imply QWORD.
Reply
0
0
Lukie
Lukie     Jason
This comment was minimized by the moderator on the site
For 2013 I used HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Security and DWORD EnableUnsafeClientMailRules with value 1.
Each version of office has its own folder in "HKEY_CURRENT_USER\Software\Microsoft\Office\"

You also need to allow the macro to run in outlook 2013:

File -> Options -> Trust Centre -> Trust centre settings
-> Macro settings -> "Notifications for all macros"

This will ask you to allow the macro the first time the rule runs, but be careful not to allow any other unknown macros during day to day use. You could also use a digitally signed macro, and only allow digitally signed ones to run.

Then create your script, create a rule that runs it, and you should be set.
Reply
0
0
Marine
Marine     Lukie
This comment was minimized by the moderator on the site
Did not work for me.  I have Outlook 2013, but maybe now that Office 365 has overstepped this setting somehow.  I have the trust settings enabled to notify for all Macros.
Reply
0
0
Espen
Espen
This comment was minimized by the moderator on the site
DWORD or QWORD? A bit confusing to understand which to use... Had to create DWORD to make it work. Thanks
Reply
0
0
Rafal
Rafal
This comment was minimized by the moderator on the site
Do You have instructions how to enable this option also for outlook 2010?
Reply
0
0
abhi
abhi
This comment was minimized by the moderator on the site
Thank You! It worked for me and as mentioned in one of the comments below, Step 6 was DWORD dialogue box for me.
Reply
0
0
There are no comments posted here yet
Load More
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations