Gå til hovedindhold

Hvordan blinker eller blinker tekst i den angivne celle i Excel?

For at gøre en bestemt celle fremragende i dit regneark, hvad med at blinke teksten i denne celle? Denne artikel viser dig metoden til at blinke teksten til en bestemt celle i Excel.

Blinkende eller blinkende tekst i den specificerede celle med VBA-kode

Blinkende eller blinkende tekst i den specificerede celle med VBA-kode

Gør følgende for at blinke teksten til en bestemt celle i Excel.

1. Trykke andre + F11 taster samtidigt for at åbne Microsoft Visual Basic til applikationer vindue.

2. i Microsoft Visual Basic til applikationer vindue, skal du klikke på indsatte > Moduler. Kopier og indsæt derefter følgende kode i vinduet Kode.

VBA-kode: Blinkende tekst fra den angivne celle i Excel

Sub StartBlink()
'Updated by ExtendOffice 20181010
    Dim xCell As Range
    Dim xTime As Variant
      On Error Resume Next
    Set xCell = Range("Sheet2!A1")
  On Error Resume Next
   
        If xCell.Font.Color = vbRed Then
            xCell.Font.Color = vbWhite
        Else
            xCell.Font.Color = vbRed
        End If
    xTime = Now + TimeSerial(0, 0, 1)
    Application.OnTime xTime, "'" & ThisWorkbook.Name & "'!StartBlink", , True
End Sub

Bemærk: i denne VBA-kode angiver Ark2 og A1 teksten i celle A1 i Ark2 vil blive blinket i den aktuelle projektmappe.

3. Tryk på andre + Q taster samtidigt for at lukke Microsoft Visual Basic til applikationer vindue.

Nu har du brug for en knap for at starte og stoppe blinkingen.

4. klik Udvikler > indsatte > Knap (formkontrol). Se skærmbillede:

5. Tegn en knap i dit regneark og derefter en Tildel makro dialogboksen dukker op, skal du klikke StartBlink i Makro navn og klik derefter på OK knap. Se skærmbillede:

6. Højreklik på den indsatte knap, og klik Rediger tekst fra højreklikmenuen. Skift derefter knapteksten til den tekst, du har brug for, såsom Start / Stop blinker.

Fra nu af, når du klikker på knappen, begynder teksten i celle A1 at blinke. Og når du klikker på knappen igen, holder teksten i celle A1 op med at blinke.

Bedste kontorproduktivitetsværktøjer

🤖 Kutools AI Aide: Revolutionér dataanalyse baseret på: Intelligent udførelse   |  Generer kode  |  Opret brugerdefinerede formler  |  Analyser data og generer diagrammer  |  Aktiver Kutools funktioner...
Populære funktioner: Find, fremhæv eller identificer dubletter   |  Slet tomme rækker   |  Kombiner kolonner eller celler uden at miste data   |   Runde uden formel ...
Super opslag: VLookup med flere kriterier  |   Multiple Value VLookup  |   VOpslag på tværs af flere ark   |   Fuzzy Lookup ....
Avanceret rulleliste: Opret hurtigt rulleliste   |  Afhængig rulleliste   |  Multivælg rulleliste ....
Column Manager: Tilføj et bestemt antal kolonner  |  Flyt kolonner  |  Skift synlighedsstatus for skjulte kolonner  |  Sammenlign områder og kolonner ...
Fremhævede funktioner: Grid fokus   |  Designvisning   |   Stor Formel Bar   |  Arbejdsbog & Ark Manager   |  Ressourcebibliotek (Autotekst)   |  Datovælger   |  Kombiner regneark   |  Krypter/Dekrypter celler   |  Send e-mails efter liste   |  Superfilter   |   Specielt filter (filter fed/kursiv/gennemstreget...) ...
Top 15 værktøjssæt:  12 tekst Værktøjer (tilføje tekst, Fjern tegn, ...)   |   50 + Chart Typer (Gantt kort, ...)   |   40+ Praktisk formler (Beregn alder baseret på fødselsdag, ...)   |   19 Indsættelse Værktøjer (Indsæt QR-kode, Indsæt billede fra sti, ...)   |   12 Konvertering Værktøjer (Tal til ord, Valutaomregning, ...)   |   7 Flet og del Værktøjer (Avancerede kombinere rækker, Opdel celler, ...)   |   ... og mere

Overlad dine Excel-færdigheder med Kutools til Excel, og oplev effektivitet som aldrig før. Kutools til Excel tilbyder over 300 avancerede funktioner for at øge produktiviteten og spare tid.  Klik her for at få den funktion, du har mest brug for...

Beskrivelse

Fanen Office bringer en grænseflade til et kontor med Office, og gør dit arbejde meget lettere

  • Aktiver redigering og læsning af faner i Word, Excel, PowerPoint, Publisher, Access, Visio og Project.
  • Åbn og opret flere dokumenter i nye faner i det samme vindue snarere end i nye vinduer.
  • Øger din produktivitet med 50 % og reducerer hundredvis af museklik for dig hver dag!
Comments (27)
No ratings yet. Be the first to rate!
Malek
Malek
This comment was minimized by the moderator on the site
Sheet name Summary and column O

i would like to have a code to make the cell flash red/white on due date. Can someone please help?
Reply
0
0
crystal
crystal     Malek
This comment was minimized by the moderator on the site
Hi Malek,
The user Sanjeev Raghavan asked a question similar to yours, you can check the replies and see if it solves your problem.
@Sanjeev Raghavan
Reply
Report
0
0
Malek
Malek     Malek
This comment was minimized by the moderator on the site
is it possible to make it without a button and auto ran?
Reply
0
0
Sanjeev Raghavan
Sanjeev Raghavan
This comment was minimized by the moderator on the site
Thank you Crystal. Let me try and get back to you.
Reply
0
0
Sanjeev Raghavan
Sanjeev Raghavan
This comment was minimized by the moderator on the site
Hello,
I am looking for solution to flash / blink a range of cells approaching a future date, say in one week. I mean something like a purchase order delivery date is 30 August. I would like to start flashing the cells by 25th August onwards and even after 30 August till it is delivered.
Can someone give me a solution?
Thank you,
Sanjeev.
Reply
0
0
crystal
crystal     Sanjeev Raghavan
This comment was minimized by the moderator on the site
Hi Sanjeev Raghavan,
The following VBA code can do you a favor. In the code, you need to change Sheet5!D2:D5 to the sheet name and the range you want to blink.

Sub StartBlink2()
'Updated by ExtendOffice 20220830
Dim xCell As Range
Dim xTime As Variant
Dim xRg As Range
Dim xWb As Workbook
On Error Resume Next
Dim xToday
Set xCell = Range("Sheet5!D2:D5") 'If there are spaces in your sheet name, enclose the sheet name in single quotes. If no space exists, enter the sheet name without the signe quotes
'On Error Resume Next
xToday = Now()
For Each xRg In xCell
If (xRg - xToday > -1) And (xRg - xToday <= 5) Then
If xRg.Font.Color = vbRed Then
xRg.Font.Color = vbWhite
Else
xRg.Font.Color = vbRed
End If
Else
xRg.Font.Color = vbBlack
End If
Next
Set xWb = xCell.Worksheet.Parent
xTime = Now + TimeSerial(0, 0, 1)
Application.OnTime xTime, "'" & xWb.Name & "'!StartBlink2", , True
End Sub
Reply
Report
0
0
Lokesh
Lokesh
This comment was minimized by the moderator on the site
Hi I need to do the same for the duplicate cell value in selected column where cell value will blink if the duplicate value appeared in excel
Reply
0
0
jass
jass
This comment was minimized by the moderator on the site
how can i create flash blink for my time sheet .where the cell contain time above 10 hours .please suggest
Reply
0
0
crystal
crystal     jass
This comment was minimized by the moderator on the site
Hi jass,
The following VBA code may solve your problem. Please give it a try.
Don't forget to change the sheet name and the hours range in the code.

Sub StartBlink()
'Updated by ExtendOffice 20220707
Dim xCell As Range
Dim xTime As Variant
Dim xRg As Range
Dim xWb As Workbook
On Error Resume Next
Set xCell = Range("'blinking cells'!D2:E27") 'If there are spaces in your sheet name, enclose the sheet name in single quotes. If no space exists, enter the sheet name without the signe quotes
'On Error Resume Next
For Each xRg In xCell
If xRg >= TimeValue("10:00:00") Then
If xRg.Font.Color = vbRed Then
xRg.Font.Color = vbWhite
Else
xRg.Font.Color = vbRed
End If
Else
xRg.Font.Color = vbBlack
End If
Next
Set xWb = xCell.Worksheet.Parent
xTime = Now + TimeSerial(0, 0, 1)
Application.OnTime xTime, "'" & xWb.Name & "'!StartBlink", , True
End Sub
Reply
Report
0
0
shalim
shalim
This comment was minimized by the moderator on the site
how to make flashing specific cell containing specific Text only ?
Reply
0
0
connie
connie
This comment was minimized by the moderator on the site
not working,

Please help
Reply
0
0
Shreenivas AK
Shreenivas AK
This comment was minimized by the moderator on the site
when protect the sheet this code not working
Reply
0
0
mekka
mekka
This comment was minimized by the moderator on the site
hi, i need help in google sheets..

I need an entire row to blink if F3:F1001 contains the "STAT". the entire row should be in orange but also blinking until the the column W3:W1001's checkbox is ticked.

is it possible? can you help? pleaseeeeeeeeeeeeeee
Reply
0
0
crystal
crystal     mekka
This comment was minimized by the moderator on the site
Hi mekka,
Sorry can't help you with that. Thank you for your comment.
Reply
Report
0
0
Sam
Sam
This comment was minimized by the moderator on the site
How do i change this to sheet 1?
Reply
0
0
crystal
crystal     Sam
This comment was minimized by the moderator on the site
Hi Sam,
If you want to make cell A1 in Sheet1 or other specific worksheet blinking, please add "Sheet1!" or other worksheet name before the cell address. See the below code line:

Set xCell = Range("Sheet1!A1")
Reply
Report
0
0
There are no comments posted here yet
Load More
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations