Gå til hovedindhold

Hvordan dobbeltklikker du på en celle og tilføjer 1 til den celleværdi i Excel?

Denne artikel viser dig metode til automatisk at tilføje 1 til en celleværdi ved at dobbeltklikke på den i Excel.

Dobbeltklik på en celle og tilføj 1 med VBA-kode

Dobbeltklik på en celle og tilføj 1 med VBA-kode

Følgende VBA-kode kan hjælpe dig med at tilføje 1 til en celleværdi efter dobbeltklik. Gør som følger.

1. Højreklik på arkfanen, hvor celleværdierne du skal tilføje 1 med dobbeltklik. Klik derefter på Vis kode fra højreklikmenuen.

2. I popping up Microsoft Visual Basic til applikationer vindue, kopier og indsæt nedenstående VBA-kode i kodevinduet.

VBA-kode: Føj 1 til en celleværdi med dobbeltklik

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
    On Error Resume Next
    If Not Intersect(Target, Range("A1")) Is Nothing Then
      Range("A1").Value = Range("A1").Value + 1
      Cancel = True
    End If
End Sub

Bemærk: I koden er A1 den celle, du vil tilføje nummer 1 til med dobbeltklik.

3. Tryk på andre + Q taster samtidigt for at lukke vinduet Microsoft Visual Basic til applikationer.

Dobbeltklik nu på celle A1 vil tilføje 1 til den eksisterende værdi som vist nedenstående skærmbillede.

Relaterede artikler:

Bedste kontorproduktivitetsværktøjer

🤖 Kutools AI Aide: Revolutionér dataanalyse baseret på: Intelligent udførelse   |  Generer kode  |  Opret brugerdefinerede formler  |  Analyser data og generer diagrammer  |  Aktiver Kutools funktioner...
Populære funktioner: Find, fremhæv eller identificer dubletter   |  Slet tomme rækker   |  Kombiner kolonner eller celler uden at miste data   |   Runde uden formel ...
Super opslag: VLookup med flere kriterier  |   Multiple Value VLookup  |   VOpslag på tværs af flere ark   |   Fuzzy Lookup ....
Avanceret rulleliste: Opret hurtigt rulleliste   |  Afhængig rulleliste   |  Multivælg rulleliste ....
Column Manager: Tilføj et bestemt antal kolonner  |  Flyt kolonner  |  Skift synlighedsstatus for skjulte kolonner  |  Sammenlign områder og kolonner ...
Fremhævede funktioner: Grid fokus   |  Designvisning   |   Stor Formel Bar   |  Arbejdsbog & Ark Manager   |  Ressourcebibliotek (Autotekst)   |  Datovælger   |  Kombiner regneark   |  Krypter/Dekrypter celler   |  Send e-mails efter liste   |  Superfilter   |   Specielt filter (filter fed/kursiv/gennemstreget...) ...
Top 15 værktøjssæt:  12 tekst Værktøjer (tilføje tekst, Fjern tegn, ...)   |   50 + Chart Typer (Gantt kort, ...)   |   40+ Praktisk formler (Beregn alder baseret på fødselsdag, ...)   |   19 Indsættelse Værktøjer (Indsæt QR-kode, Indsæt billede fra sti, ...)   |   12 Konvertering Værktøjer (Tal til ord, Valutaomregning, ...)   |   7 Flet og del Værktøjer (Avancerede kombinere rækker, Opdel celler, ...)   |   ... og mere

Overlad dine Excel-færdigheder med Kutools til Excel, og oplev effektivitet som aldrig før. Kutools til Excel tilbyder over 300 avancerede funktioner for at øge produktiviteten og spare tid.  Klik her for at få den funktion, du har mest brug for...

Beskrivelse

Fanen Office bringer en grænseflade til et kontor med Office, og gør dit arbejde meget lettere

  • Aktiver redigering og læsning af faner i Word, Excel, PowerPoint, Publisher, Access, Visio og Project.
  • Åbn og opret flere dokumenter i nye faner i det samme vindue snarere end i nye vinduer.
  • Øger din produktivitet med 50 % og reducerer hundredvis af museklik for dig hver dag!
Comments (17)
No ratings yet. Be the first to rate!
Mohamad
Mohamad
This comment was minimized by the moderator on the site
how can i answer by YES or NO by adding check mark?
Reply
0
0
OW
OW
This comment was minimized by the moderator on the site
What code would I you if I want to add 1 to multiple cells lets say E5:E15 but then add .5 or a different number to another group of cells like G5:515?
Reply
0
0
Stella
Stella
This comment was minimized by the moderator on the site
I cannot get this to work in multiple cells
Tried using, but it did not work


Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
On Error Resume Next
If Not Intersect(Target, Range("B2:L14")) Is Nothing Then
Range("B2:L14").Value = Range("B2:L14").Value + 1
Cancel = True
End If
End Sub
Reply
0
0
crystal
crystal     Stella
This comment was minimized by the moderator on the site
Hi Stella,
Please apply the below VBA to solve the problem.

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)

On Error Resume Next

If Not Intersect(Target, Range("B2:L14")) Is Nothing Then

Target.Value = Target.Value + 1

Cancel = True

End If

End Sub
Reply
Report
0
0
Bill
Bill
This comment was minimized by the moderator on the site
If you want to increment any cell in a workbook cell by double clicking on that cell but only that cell, this code works:

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
On Error Resume Next
If Not Intersect(Target, Range(ActiveCell.Address)) Is Nothing Then
ActiveCell.Value = ActiveCell.Value + 1
Cancel = True
End If
End Sub
Reply
Report
0
0
crystal
crystal     Bill
This comment was minimized by the moderator on the site
Dear Bill,
Thank you for sharing.
Reply
Report
0
0
BB
BB     crystal
This comment was minimized by the moderator on the site
Thank You! that helped me a lot!
Reply
0
0
Steve
Steve
This comment was minimized by the moderator on the site
This is great! How do I do this for multiple cells? I type in "A1,A2" instead "A1", it makes both cells equal and adds 1 to both cells simultaneously. I'd like the cells to act independently.
Reply
0
0
crystal
crystal     Steve
This comment was minimized by the moderator on the site
Sorry I didn’t get your point.
Reply
Report
0
0
Adam
Adam     crystal
This comment was minimized by the moderator on the site
Hello - agree with Steve this is great. I think what he would like (and me too) is to be able to add to the value of multiple different cells in the same tab by double clicking on them. He has amended the VBA formula so it says "A1,A2" instead of just "A1" however double clicking on "A1" adds 1 to both cells. Is it possible to change the formula so that multiple cells are included with the value of each only being increased when you click on it directly?
Reply
0
0
laura
laura     Adam
This comment was minimized by the moderator on the site
maybe by making a table with a range name. and updating the formula to include that?
Reply
0
0
Steve
Steve     Adam
This comment was minimized by the moderator on the site
Basically, with the code above, if you double clicked on A1, it would add 1 to A1. If I changed A1 to A1:A2 in the Target Range, then if I double clicked on A1 or A2, it would add 1 to A1. What I wanted was to add 1 to A1 only if I double clicked on A1, and add 1 to A2 only if I double clicked on A2. I also did not want to add 1 to both cells.

I think I have found what I was looking for:

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Not Intersect(Target, Range("D5:BC56")) Is Nothing Then
Cancel = True
Range(Target.Address).Value = Val(Range(Target.Address).Value) + 1
End If
End Sub
Reply
0
0
Sophie
Sophie     Steve
This comment was minimized by the moderator on the site
This code does not seem to work for me. Don't I have to specify which is the Target.Adress ?
Reply
0
0
crystal
crystal     Steve
This comment was minimized by the moderator on the site
Dear Steve,
I got your point finally, and thank you for sharing.
Reply
Report
0
0
Matt
Matt
This comment was minimized by the moderator on the site
Can we add a two digit number to the end of the date? for example i need to double click and add the current date and the next two digit number (20171030-01 then the next cell will show 20171030-02 upon double click)
Reply
0
0
crystal
crystal     Matt
This comment was minimized by the moderator on the site
Dear Matt,
The code only supports the number format cell. It can't work as your data 20171030-01 is text format. Sorry about that.
Reply
Report
0
0
crystal
crystal     Matt
This comment was minimized by the moderator on the site
Dear Matt,
The code only supports the number format cell. It can work as your data 20171030-01 is a text format. Sorry about that.
Reply
Report
0
0
There are no comments posted here yet
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations