Gå til hovedindhold

Sådan vender du tegn på værdier i celler i Excel?

Når vi bruger excel, er der både positive og negative tal i et regneark. Antag, at vi er nødt til at ændre de positive tal til negative og omvendt. Selvfølgelig kan vi ændre dem manuelt, men hvis der er hundreder af numre, der skal ændres, er denne metode ikke et godt valg. Er der hurtige tricks til at løse dette problem?

Vend tegn på værdier i celler med funktionen Indsæt speciel

Vend tegn på værdier i celler hurtigt med Kutools til Excel

Vend værditegnet i celler med VBA-kode


Vend tegn på værdier i celler med funktionen Indsæt speciel

Vi kan vende tegn på værdier i celler med Indsæt speciel funktion i Excel, skal du gøre som følger:

1. Tryk på nummer -1 i en tom celle og kopiere den.

2. Vælg det område, du vil vende om værditegnet, højreklik og vælg Indsæt speciel. Se skærmbillede:

3. I Indsæt speciel dialogboksen, klik Alle valgmuligheder fra pasta , Gang mulighed fra Produktion. Se skærmbillede:

4. Klik derefter på OK, og alle tegn på numrene i området er vendt.

5. Slet nummeret -1, som du har brug for.


Vend tegnet på alle numre på én gang

Kutools til Excel's Skift værditegn hjælpeprogram kan hjælpe dig med at ændre de positive tal til negative og omvendt, det kan også hjælpe dig med at vende værdienes tegn og rette det negative tegn til det normale.  Klik for at downloade Kutools til Excel!

Kutools til Excel: med mere end 300 praktiske Excel-tilføjelsesprogrammer, gratis at prøve uden begrænsning på 30 dage. Download og gratis prøveversion nu!


Vend tegn på værdier i celler hurtigt med Kutools til Excel

Vi kan hurtigt vende værditegnet med Skift værditegn træk ved Kutools til Excel.

Kutools til Excel : med mere end 300 praktiske Excel-tilføjelsesprogrammer, gratis at prøve uden begrænsning på 30 dage

Efter installation Kutools til Excelskal du gøre som følger:

1. Vælg det område, du vil vende om tegnene på numrene.

2. Klik Kutools > Indhold > Skift værditegn…, Se skærmbillede:

3. I Skift værditegn dialogboksen, skal du kontrollere Vend tegnet på alle værdier, se skærmbillede:

doc-reverse-tegn-på-værdier5

4. Og klik derefter på OK or Indløs. Alle tegn på numrene er vendt.

Tips:

Vend værditegnet i celler med VBA-kode

Vi kan også bruge en VBA-kode til at vende tegn på værdier i celler. Men vi skal vide, hvordan vi får VBA til at gøre det. Vi kan gøre det som følgende trin:

1. Vælg det område, du vil vende tegn på værdier i celler.

2. Klik Udvikler > Visual Basic i Excel, en ny Microsoft Visual Basic til applikationer vindue vises eller ved hjælp af genvejstasterne (Alt + F11) for at aktivere det. Klik derefter på indsatte > Moduler, og kopier og indsæt derefter følgende VBA-kode:

Sub Convert()
Dim C As Range
For Each C In Selection
C.Value = -C.Value
Next C
End Sub

3. Klik derefter på doc-omvendt-tegn-6 knappen for at køre koden. Og tegnet på tal i det valgte interval er vendt på én gang.


Vend tegn på værdier i celler med Kutools til Excel


Kutools til Excel: Over 300 praktiske værktøjer lige ved hånden! Start din 30-dages gratis prøveperiode uden funktionsbegrænsninger i dag. Hent nu!
Comments (15)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Tried to do the developer option and I get a:
Run-time error '438':
Object doesn't support this property or method


Any ideas?
This comment was minimized by the moderator on the site
I have a mac version of excel and the paste special doesn't allow me to do that :-/ dying.
This comment was minimized by the moderator on the site
Yes. Yes it does. Enter "-1" in a cell. Copy that cell. Highlight all the values whose sign you wish to flip. Opt-Cmd-V opens paste special dialog box, choose multiply from the Operations section (I also find it beneficial to choose "values" in the Paste Section rather than "all" to preserve any formatting).
This comment was minimized by the moderator on the site
Thx Bro for the useful thread
This comment was minimized by the moderator on the site
Thank you so much, Sir. You helped me a lot. I hope I can return the favor. Thank you so much.
This comment was minimized by the moderator on the site
thank you i had just posted in the SUN system with the srong month. this has helped me to reverse all the 195 entries within 7 minutes...
This comment was minimized by the moderator on the site
From my perspective it seems there is no foolproof way to simply remove a negative sign: Multiplying by -1 can screw up subsequent cell values if each one is using a formula. VBA requires saving in a different format. Kutools requires you to download/purchase an add-on. You can format a column to show negatives as positives, but it turns the font Red.
This comment was minimized by the moderator on the site
I'm looking to add multiple $ to cells with formulas example (=((I29+AM29+AV29+BH29+CG29+CP29+DS29+AJ78+BA91+BU91+CO91+DK78)-(V25+EF25+EN25))/4 Is there away to do this quickly...
This comment was minimized by the moderator on the site
This is tangentially related. I have a workbook in Excel 2013 that's baffling me. I get a #VALUE! error with the formula =SUM(8-(F4:F23)) in cell F2. When I reverse that, =SUM(F4:F23)-8), I get (#) where (#) is the negative of what I expect. But when I use #Jonathon's formula with my working formula in it, I again get the #VALUE! error. How is this #VALUE! error even possible? What I want is for F2 to be a positive number that's the leftover balance when F4:F24 is less that 8.
This comment was minimized by the moderator on the site
Michaelq please use abs function. It turns negative and positive values both to positive one.
This comment was minimized by the moderator on the site
Very cool trick. I imported transactions from BofA and AMEX and of course they use different signs for debits. One multiply paste later and I'm all fixed up. Thanks.
This comment was minimized by the moderator on the site
In a New Cell simply Multiply a the Cell-value by -1. It will reverse automatically. No need to perform such a long procedures. e.g if the value in B1 is -25 then in Cell C1 enter the formula : =B1 * -1 :-)
This comment was minimized by the moderator on the site
OMG THANK YOU SOOO MUCH. I have been looking all over the place for a way to simply do this. I was trying to find a way to have Excel take the SUM of a group of numbers and make it negative so that it would automatically do all the rest of the math on the sheet correctly. If anyone else is looking to do something similar, using the information I just obtained from #JAVED KHAN, enter the following function (this is just an example, change the cell references to match the ranges you are needing to use) =SUM(B2:H2) * -1 This will now take the sum of the range and automatically change the value to a negative number.
This comment was minimized by the moderator on the site
You sir have just blown my mind with your Excel Ninja ways, I tip my hat to you sir :lol:
This comment was minimized by the moderator on the site
The goal was to change an entire range of cells easily, not just a single cell. The paste multiply method is basically a one step procedure to do just that.
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations