Gå til hovedindhold

Hvordan dobbeltklikker jeg på en celle for at åbne et bestemt regneark i Excel?

Vil du hurtigt navigere til et bestemt regneark i en Excel-projektmappe? Denne artikel giver en VBA-metode til at åbne et bestemt regneark ved at dobbeltklikke på en bestemt celle i Excel.

Dobbeltklik på en celle for at åbne et specificeret regneark med VBA-kode

Dobbeltklik på en celle for at åbne et specificeret regneark med VBA-kode

Gør som følger for at åbne et specificeret regneark ved at dobbeltklikke på en celle i Excel.

1. Højreklik på arkfanen, der indeholder den celle, du vil åbne regnearket ved at klikke på den. Og klik derefter på Vis kode fra genvejsmenuen. Se skærmbillede:

2. I åbningen Microsoft Visual Basic til applikationer vindue, skal du kopiere følgende VBA-kode til kodevinduet.

VBA-kode: dobbeltklik på celle for at åbne et bestemt regneark i Excel

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
'Updated by Extendoffice 20180822
Dim xArray, xAValue As Variant
Dim xFNum As Long
Dim xStr, xStrRg, xStrSheetName As String
xRgArray = Array("A1;Sheet2", "A12;Sheet3", "A4;Sheet4", "A100;Sheet5")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xAValue = ""
xAValue = Split(xStr, ";")
xStrRg = ""
xStrRg = xAValue(0)
xStrSheetName = ""
xStrSheetName = xAValue(1)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then
Sheets(xStrSheetName).Activate
End If
Next
End Sub

Bemærk: I VBA-koden, "A1; Ark2""A12; Ark3""A4; Ark4""A100; Ark5" betyder, at dobbeltklik på celle A1 vil åbne Ark2, dobbeltklik på A2 vil åbne Ark3..., skift dem venligst baseret på dine behov.

3. Tryk på andre + Q tasterne sammen for at lukke Microsoft Visual Basic til applikationer vindue.

Fra nu af, når du dobbeltklikker på celle A1 i det aktuelle regneark, aktiveres det angivne regneark med det samme.

Relaterede artikler:

Bedste kontorproduktivitetsværktøjer

🤖 Kutools AI Aide: Revolutionér dataanalyse baseret på: Intelligent udførelse   |  Generer kode  |  Opret brugerdefinerede formler  |  Analyser data og generer diagrammer  |  Aktiver Kutools funktioner...
Populære funktioner: Find, fremhæv eller identificer dubletter   |  Slet tomme rækker   |  Kombiner kolonner eller celler uden at miste data   |   Runde uden formel ...
Super opslag: VLookup med flere kriterier  |   Multiple Value VLookup  |   VOpslag på tværs af flere ark   |   Fuzzy Lookup ....
Avanceret rulleliste: Opret hurtigt rulleliste   |  Afhængig rulleliste   |  Multivælg rulleliste ....
Column Manager: Tilføj et bestemt antal kolonner  |  Flyt kolonner  |  Skift synlighedsstatus for skjulte kolonner  |  Sammenlign områder og kolonner ...
Fremhævede funktioner: Grid fokus   |  Designvisning   |   Stor Formel Bar   |  Arbejdsbog & Ark Manager   |  Ressourcebibliotek (Autotekst)   |  Datovælger   |  Kombiner regneark   |  Krypter/Dekrypter celler   |  Send e-mails efter liste   |  Superfilter   |   Specielt filter (filter fed/kursiv/gennemstreget...) ...
Top 15 værktøjssæt:  12 tekst Værktøjer (tilføje tekst, Fjern tegn, ...)   |   50 + Chart Typer (Gantt kort, ...)   |   40+ Praktisk formler (Beregn alder baseret på fødselsdag, ...)   |   19 Indsættelse Værktøjer (Indsæt QR-kode, Indsæt billede fra sti, ...)   |   12 Konvertering Værktøjer (Tal til ord, Valutaomregning, ...)   |   7 Flet og del Værktøjer (Avancerede kombinere rækker, Opdel celler, ...)   |   ... og mere

Overlad dine Excel-færdigheder med Kutools til Excel, og oplev effektivitet som aldrig før. Kutools til Excel tilbyder over 300 avancerede funktioner for at øge produktiviteten og spare tid.  Klik her for at få den funktion, du har mest brug for...

Beskrivelse

Fanen Office bringer en grænseflade til et kontor med Office, og gør dit arbejde meget lettere

  • Aktiver redigering og læsning af faner i Word, Excel, PowerPoint, Publisher, Access, Visio og Project.
  • Åbn og opret flere dokumenter i nye faner i det samme vindue snarere end i nye vinduer.
  • Øger din produktivitet med 50 % og reducerer hundredvis af museklik for dig hver dag!
Comments (14)
No ratings yet. Be the first to rate!
Will
Will
This comment was minimized by the moderator on the site
Can't get the code to open the other worksheet
Reply
0
0
crystal
crystal     Will
This comment was minimized by the moderator on the site
Hi Will,Is there any prompts while using the code?
Reply
Report
0
0
Wilbertmosley
Wilbertmosley
This comment was minimized by the moderator on the site
Can't get code to open the other sheet, can some help
Reply
0
0
vera
vera
This comment was minimized by the moderator on the site
hi!
It cannot accept the code for more than 59 sheets.
What code do i need to use to insert more sheets.
When it change the line the code doesnt work.
Help!
Reply
0
0
Carl
Carl
This comment was minimized by the moderator on the site
Hi Crystal

I have copied the code and edited according to the name of the worksheets. The code is running but I still cannot open the sheets, what have I done wrong?

Sub OpenbyDoubleclicking(ByVal Target As Range, Cancel As Boolean)

Dim xArray, xAvlaue As Variant '
Dim xFSum As Long
Dim xStr, xStrRg, xStrSheetname As String
xRgArray = Array("A3;FTIR", "A4;Viscometer")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xAValue = ""
xAValue = Split(xStr, ";")
xStrRg = ""
xStrRg = xAValue(0)
xStrSheetname = xAValue(1)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then _
Sheets(xStrSheetname).Active
End If
Next
End Sub


Many thanks
Reply
0
0
crystal
crystal     Carl
This comment was minimized by the moderator on the site
Hi Carl,
In your code, please replace the first line with "Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)".
Thank you for your comment. The entire code should be as follows.

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim xArray, xAValue As Variant
Dim xFNum As Long
Dim xStr, xStrRg, xStrSheetName As String
xRgArray = Array("A3;FTIR", "A4;Viscometer")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xAValue = ""
xAValue = Split(xStr, ";")
xStrRg = ""
xStrRg = xAValue(0)
xStrSheetName = ""
xStrSheetName = xAValue(1)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then
Sheets(xStrSheetName).Activate
End If
Next
End Sub
Reply
Report
0
0
neil04
neil04
This comment was minimized by the moderator on the site
Hi how can i extend my array? it stucks already and i cannot add more of this because it limits to col 1024 only for that line. pls help

xRgArray = Array("A2;Sheet2", "A3;Sheet3", "A4;Sheet4", "A5;Sheet5")
Reply
Report
0
0
crystal
crystal     neil04
This comment was minimized by the moderator on the site
Hi Neil,
The code works well in my case even extended my array to Array = Array("A2;Sheet2", "A3;Sheet3", "A4;Sheet4", "A5;Sheet5", "A6;Sheet6").
Can you tell me your Excel version?
Reply
Report
0
0
James
James
This comment was minimized by the moderator on the site
After you get to the desired sheet. Is there a way to copy information from a cell in that sheet and automatically go back to the cell I double clicked on originally in the first sheet?
Reply
0
0
crystal
crystal     James
This comment was minimized by the moderator on the site
Hi James
You need to manually click the original worksheet tab to back to it. Sorry can't take this into consideration.
Reply
Report
0
0
Guest
Guest
This comment was minimized by the moderator on the site
Is there a way to do multiple codes for one tab? such as clicking on another cell to jump into another worksheet.

How would that code look like?
Reply
0
0
crystal
crystal     Guest
This comment was minimized by the moderator on the site
Good day,

The below VBA code can help you to solve the problem. Thanks for your comment.

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim xArray As Variant
Dim xFNum As Long
Dim xStr, xStrRg, xStrSheetName As String
xRgArray = Array("A2;Sheet2", "A3;Sheet3", "A4;Sheet4", "A5;Sheet5")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xStrRg = ""
xStrRg = Left(xStr, 2)
xStrSheetName = ""
xStrSheetName = Right(xStr, Len(xStr) - 3)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then
Sheets(xStrSheetName).Activate
End If
Next
End Sub
Reply
Report
0
0
SG
SG     crystal
This comment was minimized by the moderator on the site
Hi, In the line that states xStrRg = Left(xStr, 2), this picks up the cell if its a single number cell i.e. A1, A2, A3. but not if its A11, or A111. how do i write the code to allow me to use cells A1, A11, and A111?

Hope this makes sense, i'm not particularly technical!!
Reply
0
0
crystal
crystal     SG
This comment was minimized by the moderator on the site
Good Day,
The code has been optimized again. Please have a try and thanks for your comment.

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim xArray, xAValue As Variant
Dim xFNum As Long
Dim xStr, xStrRg, xStrSheetName As String
xRgArray = Array("A1;Sheet2", "A12;Sheet3", "A4;Sheet4", "A100;Sheet5")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xAValue = ""
xAValue = Split(xStr, ";")
xStrRg = ""
xStrRg = xAValue(0)
xStrSheetName = ""
xStrSheetName = xAValue(1)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then
Sheets(xStrSheetName).Activate
End If
Next
End Sub
Reply
Report
0
0
There are no comments posted here yet
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations